The Evolution is a rotating rinser-blower-sterilizer characterised by grippers with a symmetrical and irreversible opening action, which grasp the bottles by the neck and rotate them on their own axis, both in fixed and mobile nozzle versions, so as to reduce and optimise the space required by the machine.
Thanks to the mobile nozzle, spraying can begin when the bottle is horizontal, thereby increasing treatment times.
Treatment times can easily be adjusted by regulating the valve closing cams.
Every detail has been designed to guarantee a high level of hygiene, making this machine particularly suitable for applications in “aseptic environments”.
Application examples:
“Static gripper P.E.” the best
solution for PET bottles.
Evolution gripper with mobile nozzle
by synchronized movement
Gripper with mobile nozzle for
double treatments of big containers.
Gripper with mobile nozzle.
Fixed nozzle (30.000 BPH 1.5 lt.).
Rinser and steam sterilizer for
baby food jars.
EVOLUTION P.E.
Designed and manufactured for the treatment of PET bottles, patented EVOLUTION grippers are characterised by holding the bottles exclusively by the neck and by the absence of any mobile part or any size change over. The neck gripping is granted by two stainless steel rollers that develop the clamping by means of pliable components upon which the rollers are installed.
The bottle is pushed inside the two rollers at the entry star with a slight pressure and is taken out in the same way by the exit star. Due to their design and AISI 316 standard construction these grippers allow for reduced maintenance costs and greatly improve machine sanitation. They also minimise machine from stoppages due to deformed or misplaced bottles.
"Evolution P.E." the best solution for PET bottles.
Working cycles:
Type of nozzle
Description
1R
Fixed and mobile
One rinsing phase with fresh water (to drain) or with sterilizing solution (water+ozone, water+sulphur dioxide, chlorinated water) followed by a drainage time dependant upon the acceptable residual water content.
1S
(1S+1A)
Mobile
One blowing phase with sterile air, sterilizing gas or steam to remove any dust or harmful gas from bottles and it is the case, make them sterilized. In order to remove the injected gas and any particles in suspension, it is possible that blowing and suction phases take place alternately. (1S+1A).
1R + 1S
(1V)
Mobile
One rinsing phase with fresh water (to drain) or with sterilizing solution followed by a blowing phase with sterile air to make easy the drainage, or with sterilizing gas (1R+1S) or steam to complete the container cleaning (1R+1V).
2R
Fixed and mobile
(2 way)
One rinsing phase with sterilizing solution, either fresh or re-circulated, followed by a second rinsing phase with fresh water (to drain) and by a final drainage phase
2S
(1S+1V)
Mobile
(2 way)
One blowing phase with sterile air to remove any residual or harmful gas from bottles followed by a second blowing phase with sterilizing gas (2S) or steam in order to make container sterilized (1S+1V).
3R
Fixed
(3 way)
Rinsing stage with a high-concentration of sterilization.
Solution followed by a second procedure of low concentration solution, and the final rinsing stage with sterile disposable water and a final dripping stage.
1R+1V+1S
(1R)
Mobile
(3 way)
A rinsing stage with hydrogen dioxide sterilising solution (H2O2), followed by a steam activation stage and a third sterile-air blowing (1S) or sterile water rinsing (1R) stage.
